三盛
/
/
PTFE and PFA Butterfly Valve Material Differences

PTFE and PFA Butterfly Valve Material Differences

  • 分类:行业新闻
  • 作者:
  • 来源:
  • 发布时间:2022-11-16
  • 访问量:0

【概要描述】Teflon PTFE is also known as polytetrafluoroethylene.Teflon PFA is also known as soluble polytetrafluoroethylene.Many valve purchases are not quite clear which is better corrosion resistance for butterfly valves using PTFE and PFA? What are the advantages anddisadvantages of each? Difference in temperature resistance, which is cheaper?
Different in nature
1.PFA: a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene.2.PTFE: a polymer compound formed by polymerization of tetrafluoroethylene.
Different characteristics
PFA characteristics
(1)Crystal material, low moisture absorption.It can be processed into products by thermoplastic processing methods.
([2)Porfuitity,easy to decompose and corrosive gas is generated during decomposition. The molding temperature does not exceed475°C, the mold is heated to 150-200°C, and the pouring system has little resistance to material flow.
(3 Trasucent pelles, ijection molding and extrusion molding.Molding temperature is 350-400C, 475℃ and above are easy to causediscoloration or blistering. Pay attention to the difficulty of demolding.                                  
(4) Due to the corrosion effect of molten material on metal, long-term production requires chrome plating on the mold.PTFE characteristics

PTFE Characteristic                                                                                                                                                                                                                                                                                                                                        (1)High temperature resistance: long-term use temperature 200~260℃;                                                                                                                                                                                                                                                    (2)Low temperature resistance: softer at -100℃;
(3)Corrosion resistance: resistant to aqua regia and all organic solvents;                                                                                                                                                                                                                                                    (4) Weather resistance: the best aging life of plastics;
(5)High lubrication: with the smallest coefficient of friction (0.04) among plastics;
(6) Non-sticky: It has the smallest surface tension among solid materials without adhering to any substance.Summary
The biggest difference is that PFA is easier to process and more expensive than PTFE, but in practice PTFE has better corrosion resistarand is also resistant to high temperatures.
Sansheng Fluorine Plastics Technology  is an industial manufacturer and supplier of butterfly valves in China, producing PTFE and PFAlined butterfly valves, if youhave any questions about butterfly valves or request for quotation, please feel free to contact us.+8615067244404

PTFE and PFA Butterfly Valve Material Differences

【概要描述】Teflon PTFE is also known as polytetrafluoroethylene.Teflon PFA is also known as soluble polytetrafluoroethylene.Many valve purchases are not quite clear which is better corrosion resistance for butterfly valves using PTFE and PFA? What are the advantages anddisadvantages of each? Difference in temperature resistance, which is cheaper?
Different in nature
1.PFA: a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene.2.PTFE: a polymer compound formed by polymerization of tetrafluoroethylene.
Different characteristics
PFA characteristics
(1)Crystal material, low moisture absorption.It can be processed into products by thermoplastic processing methods.
([2)Porfuitity,easy to decompose and corrosive gas is generated during decomposition. The molding temperature does not exceed475°C, the mold is heated to 150-200°C, and the pouring system has little resistance to material flow.
(3 Trasucent pelles, ijection molding and extrusion molding.Molding temperature is 350-400C, 475℃ and above are easy to causediscoloration or blistering. Pay attention to the difficulty of demolding.                                  
(4) Due to the corrosion effect of molten material on metal, long-term production requires chrome plating on the mold.PTFE characteristics

PTFE Characteristic                                                                                                                                                                                                                                                                                                                                        (1)High temperature resistance: long-term use temperature 200~260℃;                                                                                                                                                                                                                                                    (2)Low temperature resistance: softer at -100℃;
(3)Corrosion resistance: resistant to aqua regia and all organic solvents;                                                                                                                                                                                                                                                    (4) Weather resistance: the best aging life of plastics;
(5)High lubrication: with the smallest coefficient of friction (0.04) among plastics;
(6) Non-sticky: It has the smallest surface tension among solid materials without adhering to any substance.Summary
The biggest difference is that PFA is easier to process and more expensive than PTFE, but in practice PTFE has better corrosion resistarand is also resistant to high temperatures.
Sansheng Fluorine Plastics Technology  is an industial manufacturer and supplier of butterfly valves in China, producing PTFE and PFAlined butterfly valves, if youhave any questions about butterfly valves or request for quotation, please feel free to contact us.+8615067244404

  • 分类:行业新闻
  • 作者:
  • 来源:
  • 发布时间:2022-11-16
  • 访问量:0
详情

Teflon PTFE is also known as polytetrafluoroethylene.Teflon PFA is also known as soluble polytetrafluoroethylene.Many valve purchases are not quite clear which is better corrosion resistance for butterfly valves using PTFE and PFA? What are the advantages anddisadvantages of each? Difference in temperature resistance, which is cheaper?
Different in nature
1.PFA: a copolymer of a small amount of perfluoropropyl perfluorovinyl ether and polytetrafluoroethylene.2.PTFE: a polymer compound formed by polymerization of tetrafluoroethylene.
Different characteristics
PFA characteristics
(1)Crystal material, low moisture absorption.It can be processed into products by thermoplastic processing methods.
([2)Porfuitity,easy to decompose and corrosive gas is generated during decomposition. The molding temperature does not exceed475°C, the mold is heated to 150-200°C, and the pouring system has little resistance to material flow.
(3 Trasucent pelles, ijection molding and extrusion molding.Molding temperature is 350-400C, 475℃ and above are easy to causediscoloration or blistering. Pay attention to the difficulty of demolding.                                  
(4) Due to the corrosion effect of molten material on metal, long-term production requires chrome plating on the mold.PTFE characteristics

PTFE Characteristic                                                                                                                                                                                                                                                                                                                                        (1)High temperature resistance: long-term use temperature 200~260℃;                                                                                                                                                                                                                                                    (2)Low temperature resistance: softer at -100℃;
(3)Corrosion resistance: resistant to aqua regia and all organic solvents;                                                                                                                                                                                                                                                    (4) Weather resistance: the best aging life of plastics;
(5)High lubrication: with the smallest coefficient of friction (0.04) among plastics;
(6) Non-sticky: It has the smallest surface tension among solid materials without adhering to any substance.Summary
The biggest difference is that PFA is easier to process and more expensive than PTFE, but in practice PTFE has better corrosion resistarand is also resistant to high temperatures.
Sansheng Fluorine Plastics Technology  is an industial manufacturer and supplier of butterfly valves in China, producing PTFE and PFAlined butterfly valves, if youhave any questions about butterfly valves or request for quotation, please feel free to contact us.+8615067244404

关键词:

扫二维码用手机看

相关新闻

蝶阀的类型和特点

蝶阀的类型和特点

市场上工业法兰蝶阀的材料有很多种。选择合适的蝶阀时,往往需要确定材料。如果想选择寿命较长,对阀门密封要求不是特别高的朋友,建议使用金属密封阀门。金属材料更耐腐蚀,不同于弹性阀门的机械装置,所以耐用性更强。但弹性阀的密封效果相当好,而金属阀很难完全密封,不适合密封要求高的工业管道系统。
2023-02-08
卫生级阀座厂家:密封圈的性能是怎样?

卫生级阀座厂家:密封圈的性能是怎样?

  卫生级阀座厂家:密封圈的选择对密封性能和使用寿命具有重要意义。材料的性能直接影响密封的使用性能。   密封圈的性能是怎样?   除了密封圈材料的一般要求外,密封圈还必须注意以下条件:
2023-02-01
凯斯通阀座厂家:蝶阀的一些知识点

凯斯通阀座厂家:蝶阀的一些知识点

凯斯通阀座厂家:随着社会经济的快速发展,国内外有许多知名企业都在进行电动阀门的开发。现在,电动蝶阀在实际应用中越来越广泛。产品以优良的品质和完善的售后服务赢得客户的青睐。电动蝶阀属于各种电动阀和电动调节阀。
2023-01-19
卫生级阀座厂家告诉你蝶阀的优点是什么?

卫生级阀座厂家告诉你蝶阀的优点是什么?

卫生级阀座厂家:蝶阀的开合速度快,容易,流体流动阻力小,可以通过经常进行操作。蝶阀的结构简单,形状小,结构长度短,体积小,重量轻,适用于大口径阀门。能携带大量泥浆,管道进行口内积液最少。
2023-01-09
上一页
1
2
...
14

关于我们

一家集设计、生产、销售及服务项目为一体的科技创新企业,公司主要生产泵阀蝶阀高温衬氟阀座密封圈、高温卫生级阀座密封圈等其它产品。

联系我们

移动电话: 15067244404
地址: 浙江省德清县武康镇逸仙路328号(瑞明小微企业园)

 

          微信                          WhatsApp

微信
微信

Copyright © 德清三盛氟塑科技有限公司  浙ICP备2020041201号